On July 5, the 16th Shanghai International Industrial Assembly and Transmission Technology Exhibition (AHTE 2023) officially kicked off at the Shanghai New International Expo Center. As the authoritative industrial assembly platform in the industry, 600+ exhibitors around the world bring 10,000 types of heavy products to compete on this stage, and 90,000 + visitors gather together to share the wonderful momentum of industrial assembly and innovative intelligent manufacturing collision.

At the exhibition site, Danikor brought a variety of innovative automated assembly solutions to the scene, a total of 40+ technical products around automatic feeding and intelligent tightening, to show the guests the hard strength of our core technology, highlighting the power of Danikor assembly "intelligent manufacturing"! The booth atmosphere is warm, attracting many visitors to stop to experience and consult and exchange.

1 Floating tightening technology: deviation compensation, smooth entry hole

Floating booth scene popularity explosion! The innovative solution presented by Danikor in this exhibition can effectively improve the success rate of screw insertion and screwing due to incorrect hole positioning due to poor consistency of parts.  Through special structural design, This allows the socket to have a floating amount within a certain range, which can compensate to some extent when there are differences in product precision or consistency during tightening.  Thus improve the success rate of hole insertion and tightening, compared with traditional 2D camera shooting positioning, to cost reduction and efficiency increase.

2 Cleaning control system: feeding cleaning

Another major solution highlight of Danikor at the exhibition → General Controller, which can meet the closed-loop control of the whole process from screw feeding to tightening, and one-screen control, greatly reduce the debugging time, improve the on-site experience and stability of screw feeding and tightening equipment, and make the client docking simpler and more efficient. At the same time, in the face of the increasingly stringent requirements for clean assembly in the industry, the 1.5L step feeder unveiled at the exhibition can dust for a single screw, and the stability is higher and the screw jamming rate is lower, the upgraded version of the screw jamming rate has been reduced to 0.005%, and the flat pad screw 0.02%.

3 Intelligent guidance system: accurate positioning, orderly tightening

Effectively control the quality of the tightening process, guide workers to carry out a standardized and orderly tightening process, realize the switching control of tightening procedures, and accurately control the start and stop of intelligent screw driver according to positioning, prevent errors and leaks, and reduce product assembly defects. At the same time, the data can be collected, uploaded and stored through the tool, so that the tightening process of each screw can be controlled, and the tightening results can be traced, which provides a reliable data guarantee for industrial assembly.

4 Multi Feeder: all things can vibrate

At the site, Danikor's full range of flexible vibration disks were deployed together to jointly analyze the vibration of materials of different materials and sizes, attracting many visitors to stop and experience the vibration sensation on site. All products adopt dynamic vibration isolation technology, which can isolate more than 95% of the vibration energy and avoid resonance phenomenon, thereby improving the working beat.

Danikor, as a senior industry explorer, focuses on the whole process assembly link from feeding to tightening, and is committed to the high-quality development of products. At this exhibition, the three product series of automatic screw feeding & tightening system, intelligent screw driver and flexible feeding system were displayed, with a total of 40+ technical products presented for different site conditions. Create different device application solutions.

Continuous innovation and breakthrough, to provide customers with competitive intelligent assembly solutions, is the consistent pursuit of Danikor, the future will continue to deepen the layout in the field of digital intelligent assembly, help product technology innovation and development, embrace a richer assembly production line scene, to provide customers with more efficient, smarter, more reliable solutions and services.